Unit 3-4, Regis Industrial Estate, Dorset Road, Sheerness, Kent, ME12 1LY

Units 3 & 4 are constructed with a steel frame clad to roof and upper elevations with profiled steel sheeting incorporating translucent roof lights and underlined with insulation. The ground floor front and rear elevations are constructed with brick and block to a height of approximately two metres with upper elevations clad with profiled steel sheeting. At the front the panelling has been replaced with new to create a more modern look and there are two electric roller shutter doors each 9ft 9in (3.0m x 3.0m), together with two personnel doors (one sealed off).
The building has CCTV and an alarm.

Internally there isn't a party wall between the two units.

The remainder of the Ground Floor has been used as an engineering workshop with an approximate height to the underside of the mezzanine of 8ft 3in (2.5m) and there is an office and WC.

There is an almost full mezzanine covering the floor area, other than part inside the right-hand roller shutter where it is cut back to give loading access to the mezzanine.

Part of the mezzanine is constructed with solid concrete supported on steelwork. The remainder is surfaced with timber and could be partially or completely removed depending on the purchaser's requirements.

The roof is unusually high rising to approximately 17ft 6in (5.4m) above the mezzanine at the ridge. This allows for very high racking or the potential for a further mezzanine, subject to planning.

There is parking for 6 vehicles directly opposite the units.