Commercial Properties For Sale by Naylors, Newcastle Upon Tyne, including sold STC

Cobalt 13a is a state-of-the-art office building comprising two three storey wings, designed around a large central entrance and featuring a dramatic glazed facade. The property is for sale or to let in wings. The building has been fitted out to a high standard with the following specification: Air conditioning Full access raised floor clear void 150mm Suspended ceilings Double height feature reception and atrium 2 x 8 person passenger lifts 3m clear floor to ceiling height 1.5m planning module 6 meter structure grid Kitchen 127 car parking spaces (parking ration 1:238 sq ft) with control barrier Fully DDA compliant BREEAM:Good The large floor plates are designed to provide maximum efficiency of the workspace, creating a stylish working environment that can be delivered to meet an occupiers exact requirement.

DEVELOPMENT OPPORTUNITIES - SEATON BURN MANUFACTURING/DISTRIBUTION/ENERGY STORAGE / STORAGE - SUBJECT TO PLANNING PERMISSION Strategic 17 acre site with immediate access to both A1 and A19 Bespoke opportunities for manufacturing or distribution uses Up to circa 300,000 sq. ft. Energy storage potential given close proximity to grid sub-station Close proximity to a skilled and cost-effective workforce Completed buildings available To Let or Purchase Subject to Planning Permission In the Greenbelt PLANNING Due to the current Green Belt designation of the land, the planning case will need to be based upon the specific requirements of the occupier and the characteristics of the site. The unique strategic location provides a robust basis to justify the right proposal. LOCATION The site is strategically located adjacent to the A19/A1/A1068 roundabout at the northern tip of the town of Seaton Burn. The site has immediate access to both the A19 trunk road heading south east and A1 motorway north and south. Directly to the east and south of the site is a mix of industrial and trade uses, as well as the popular Blezard Business Park, a modern office development

The property consists of a two-storey retail parade comprising of 8 units. The property is of brick construction with a flat roof. The retail units face onto the busy Sunderland Road, with loading areas to the rear. The upper floors are a mix of office and storage uses. Included with the property is an adjoining car park. The property has been improved during the period of the current ownership through several refurbishments and upgrades to the units and car park.It also benefits from most of the units having long established tenants.

The property is in good condition, with the ground floor having been recently refurbished. It provides accommodation over both ground and first floors, with WC and kitchen facilities located on the ground floor. The property also benefits from an attractive entrance/reception area and offers a good provision of on-site parking.

The Fram Well was designed by award winning architects, Mawson Kerr, and was completed in 2020. The property enjoys an elevated position with views of Durham city centre, Durham Castle and Cathedral. The exterior of the building boasts a spectacular part glazed, post composite clad façade offering floor to ceiling glazed panels to each floor, flooding the office space with natural light. - Air conditioning - Floor to ceiling height of 2.7m throughout - LG2 compliant LED lighting with PIA control - 100mm full access raised floor - 1 x 8-person passenger lift - Male, female and accessible toilets on all floors - 21 car parking spaces - Flexible floor plates which would permit future multi-occupation

The property comprises two traditional industrial terraces together with a detached industrial unit. In total, there are 19 units ranging in size from approximately 1,200 sq. ft to 6,000 sq. ft .  The terraced units are of steel portal frame construction with brick/blockwork elevations to approximately 2 metres, under a profiled insulated metal clad roof. Specification includes a mix of LED and fluorescent strip lighting, and electric or manual roller shutter doors. Eaves heights range from approximately 3.6 metres to 5.75 metres at the apex, while all roller shutter doors measure approximately 3.0 metres wide by 3.0 metres high.  The detached industrial unit is of steel frame construction with brick/blockwork elevations beneath a pitched profiled metal roof. The unit benefits from a manual roller shutter door opening onto a loading/parking area and is fitted with fluorescent lighting throughout. Internally, it also incorporates two small office areas and is currently occupied as a metalworking facility.

The property comprises a detached industrial unit of steel frame construction with brick and clad elevations with the following specification: Singular and open plan offices with reception area, carpeted throughout with gas fired central heating and category 2 lighting Canteen area and W/C facilities serving both warehouse and office areas Strip fluorescent and LED lighting to the warehouse with pitched roof and sprinkler system 2 roller shutter doors measuring approximately 4.2m wide x 4.2m high and 5.5m wide x 4.1m high opening out to a loading apron Eaves height of 5m rising to 7m at the apex Approximately 70 car parking spaces Site area of approximately 3.78 acres

The unit comprises a modern detached industrial unit of steel frame construction with block work walls to dado height and insulated clad elevations above a pitched insulated clad roof with intermittent roof lights.To the front of the property there is a reception area which connects to a number of cellular offices with demountable partitioning together with tea point and WC facilities. These areas have double glazed windows, suspended ceilings, are carpeted throughout with Cat II lighting and gas central heating .There are stairs from the reception which leads to first floor offices to provided a number of offices and boardroom together with kitchen, shower and WC facilities. These areas have double glazed windows, suspended ceilings, LED lighting, are carpeted throughout and gas central heating. The warehouse has an eaves height of approximately 5.5m extending to 8m at the apex where there is LED lighting, gas blower heaters and a number of mezzanine decked areas of steel frame construction together with canteen and WC facilities. There is a two-storey demountable office structure which is used as a laboratory with a small offshoot extension to the rear used as a store. There are two electrically operated loading doors of 3.5m wide by 4.5m high which opens out on a secure concrete fenced yard which has automatic entry and exit gates from the east and west of the site to provide 360-degree circulation. There are approximately car parking 60 spaces to the front of the...

The property comprises a substantial industrial property of steel portal frame construction with a mixture of solid brick and concrete blockwork elevations, some of which are clad in metal decking. The property is surmounted by a 5 bay pitched metal decking and cement sheet roof, incorporating Perspex roof lights. The property has been extended to the northern elevation by way of a single storey extension with solid brick elevations surmounted by a flat roof, having uPVC double glazed windows. Attached to the western elevation is a two-storey modular portacabin providing additional office space. Internally, the property provides a workshop/ manufacturing facility with partition walls separating the property into three open plan workshops over the ground floor only. There is a small mezzanine situated in the corner of the workshop. There is one steel roller shutter, along with three steel concertina loading doors. There is also a 6-tonne and a 10-tonne lifting crane. The workshops have an internal eaves height of approximately 6.8 metres. Within the single storey extension, there are a series of offices including a board room, a small kitchenette and staff WC's. Externally, there is a concrete surfaced loading yard in the north west corner of the site, which has gated access off Greatham Street. To the west side of the building is a large extractor unit for wood shavings and sawdust. This is accessed via a narrow access off the loading yard. There are six marked car...

The property consists of a two-storey retail parade comprising of 8 units. The property is of brick construction with a flat roof. The retail units face onto the busy Sunderland Road, with loading areas to the rear. The upper floors are a mix of office and storage uses. Included with the property is an adjoining car park. The property has been improved during the period of the current ownership through several refurbishments and upgrades to the units and car park.It also benefits from most of the units having long established tenants.

Cobalt 13a is a state-of-the-art office building comprising two three storey wings, designed around a large central entrance and featuring a dramatic glazed facade. The property is for sale or to let in wings. The building has been fitted out to a high standard with the following specification: Air conditioning Full access raised floor clear void 150mm Suspended ceilings Double height feature reception and atrium 2 x 8 person passenger lifts 3m clear floor to ceiling height 1.5m planning module 6 meter structure grid Kitchen 127 car parking spaces (parking ration 1:238 sq ft) with control barrier Fully DDA compliant BREEAM:Good The large floor plates are designed to provide maximum efficiency of the workspace, creating a stylish working environment that can be delivered to meet an occupiers exact requirement.

There are four units within the 1-acre site. The larger blue unit at the front of the site, fronting the main road, is of a steel portal frame construction with brick/blockwork elevations to approximately two metres and profiled metal cladding above. The roof is of pitched design with single-skin profiled metal decking. The unit has an eaves height of approximately 3.88m, rising to 5.10m at the apex, and benefits from an electric roller shutter door measuring approximately 4.18m high by 3.84m wide. Internally, the accommodation is divided into a number of production rooms, offices, W.C. facilities and a kitchenette, with fluorescent strip lighting and gas-fired heating throughout. There is also a warehouse area, incorporating a mezzanine storage area. Units B and C comprise a single industrial building that has been split into two units. The building is of steel portal frame construction with brick/blockwork elevations to approximately two metres and profiled metal cladding above and a pitched roof with profiled metal decking incorporating approximately 5% translucent roof lights. The eaves height is approximately 10.75m in Unit B and 9.75m in Unit C. Both units are fitted with manual roller shutter doors, with Unit B's door measuring approximately 5.80m high by 4.60m wide and Unit C's measuring approximately 5.52m high by 4.62m wide. Internally, the units provide standard industrial accommodation with LED lighting throughout and a mezzanine floor for extra storage...

The property comprises a former motor dealership of steel portal frame construction which has been subsequently sub-divided to provide two separate self-contained units, served by a tarmacadam surfaced car park and yard area enclosed by a metal palisade fence.

3 Silverton Court provides a prestigious selfcontained office which is spread across two floors and benefits from 26 dedicated car parking spaces. The offices available are over ground floor and first floor and benefit from the following specification: * Ground floor reception area * Raised access floors with floor boxes * Air conditioning * Suspended ceiling incorporating LED lighting * WC & shower facilities * Lift access * First floor kitchen & breakout area

The property comprises a detached industrial building of steel portal-frame construction, with insulated profile-clad elevations beneath a pitched roof incorporating translucent roof panels. The central warehouse bay has a clear eaves height of approximately 6.9 metres, rising to 8.1 metres at the apex. The lower northern bay has a clear height of approximately 3.15 metres. A further southern bay incorporates mezzanine accommodation and adjoining two-storey offices. The warehouse benefits from a concrete floor, gas-fired blower heating and a mix of strip and LED lighting. A three-tonne crane is installed within the central bay. The offices provide a mixture of cellular and open-plan accommodation, together with reception, kitchen and male and female WC facilities. Externally, the property has a fenced yard and car parking. Two roller shutter loading doors provide access from the yard.

The subject premises comprises a self-contained factory / production facility, offering two storey office/storage accommodation with yard and car parking. The main building is constructed of steel portal framed design with brick and glazed elevations under a pitched roof. The offices are of brick construction with flat felt roof over, providing a combination of open plan, cellular offices, along with reception, W.C facilities and welfare facilities. The property has been extended to provide an additional workshop which has an eaves height of 6m. There is LED lighting throughout together with gas fired heating.

The property comprises a detached industrial unit of steel portal frame construction with block work and clad elevations under a profile sheet pitched roof, with circa 10% skylights. The warehouse area specification includes concrete flooring, high bay LED lighting and an electrically operated roller shutter door measuring 4.97m wide x 5.02m high. Minimum eaves height in the warehouse is 5.40m to the haunch extending to a maximum eaves height of 7.10m to the apex. The office and amenity block contains offices over ground and first floors which are carpeted and include suspended ceiling with LED and fluorescent tube lighting. Additionally, there are two WCs and a kitchenette, along with entrance lobby. Externally the property benefits from a sizeable block paved parking and loading yard area with circa 22 car parking bays.

The property comprises of a single storey detached industrial building of steel framed construction having brick/blockwork elevations to two metres with profiled metal cladding above. The roof is of pitched design and has profiled metal decking over, incorporating 5% translucent lights. The eaves height ranges from 5.5m to 6.7m at the apex. Internally, the warehouse is used for storage and distribution with racking throughout; there are two electric up/over shutter doors with a height of 4.9m and a width of 4m both doors go out to the yard/car park. The property benefits from a tenant-installed trade counter to the front, together with a first-floor office mezzanine. The unit is fitted with LED lighting throughout and 3-phase electricity. There is no heating within the warehouse area; however, the trade counter and office accommodation has electric wall heaters and an air conditioning unit.

Ground floor lock up shop currently divided to provide treatment area, rear private cubicles and storage with four fully furnished self-contained flats to the first and second floors.

The site comprises a rectangular shaped opportunity which is enclosed by a fence of approximately 1.8m high and is laid on partial hardcore with made up ground.

The property forms part of Akenside House, a prestigious Grade II listed building and provides for first floor office accommodation. The fit out comprises of a contemporary design and is made up of a mixture of open plan and cellular design accommodation which is to the following specification: Part Exposed Ceilings and Walls Feature Lighting Boardrooms Network Cabling installed Door access control system Superfast uncontended Lease-line internet connection currently installed.

The property comprises a mid-terraced three storey building with brick elevations under a dual-pitched tiled roof. The ground floor retail space is fully utilised by Specsavers and incorporates retail area, stores and staff amenity areas. The two upper floors consist of vacant office space which have been divided into a number of individual suites and could therefore be utilised by either a single or multiple tenants. The offices have been recently refurbished by the landlord with specification including LED lighting, electric heating, carpeting and kitchen/WC facilities. To the rear of the property, with access from Eastgate, there are 4 car parking spaces which are allocated to Specsavers.

The property forms part of a five-building development, each constructed to a high architectural specification with quality finishes throughout. The estate offers a vibrant and dynamic environment, home to a mix of architects, creative designers, and cultural and service-based businesses. All other buildings within the development are fully occupied. The premises benefit from the following features: - Cassette air conditioning - Suspended ceilings - Perimeter trunking - Carpeting throughout - Shower and kitchen facilities - Fully fitted including a boardroom

The property comprises a four storey building including the benefit of a basement area. It was last occupied as a furniture showroom, resulting in large, predominantly open-plan floor plates across each level. A central staircase provides access throughout the building, and there is also a decommissioned service lift extending from the basement to the second floor. Given the layout and scale, the property lends itself to a variety of potential uses, subject to obtaining the necessary planning consents.

The property consists of a semi-detached industrial unit of steel framed construction under a pitched roof. The elevations are a made of rendered brickwork with cladding above. The roof has insulated corrugated asbestos cement decking over internal insulated panels.   The property has a single dock level loading door to the rear and an office entrance to the front. The unit is currently used for storage with a small office and mezzanine. The tenant currently occupies the next-door unit from which they have knocked a doorway through for access between the units. The property also benefits from external parking and loading area.

The property consists of a mid-terraced warehouse unit of steel portal frame construction with block work walls and profile insulated cladding from 2m high and to the roof, which incorporates translucent panels. There is a single up/over loading door to the front of the unit. Internally, the property is utilised for storage, with a small trade counter and office located to the front of the unit. The property also benefits from a small mezzanine floor, which is used for additional storage. The unit specification includes fluorescent tube lighting and gas heating, with an eaves height to the apex of 7m. Externally, the property benefits from seven designated parking spaces together with a loading area.

Accessed via an attractive, landscaped archway and opening onto a spacious courtyard plaza with convenient drop-off and pick-up bays, 3C St James Gate offers a two-storey, shell-and-core commercial space with its own dedicated entrance. The interior benefits from an exposed ceiling finish, creating a fresh, contemporary aesthetic complemented by generous floor-to-ceiling heights. Recently stripped back, the space provides a highly flexible blank canvas, well suited to a variety of potential uses (subject to planning).

The unit comprises a semi-detached, purpose-built warehouse facility that is configured to offer an open-plan warehouse area. Access to the warehouse is via a roller shutter located on the left side of the front elevation, measuring approximately 3.5m x 3.5m. There is also access via a pedestrian door which leads into a lobby area and onto the office accommodation. The warehouse benefits from LED strip lighting, WCs, large gas air blowers, and a generous eaves height which measures to 4.3m rising to 5.8m at the apex. There is a large mezzanine that runs through half of the unit, where you will find great storage space for any industrial occupier. The mezzanine benefits from LED strip lighting and a kitchenette. The unit also benefits from office accommodation situated over two floors. This space is fitted out with carpeted floors, painted elevations, gas central heating and fluorescent lighting.